American Thin Press Cambered Angle Grip Bar
Built for Focus, Trust, and Strength
We merged the thinner, steadier American Thin frame with our most versatile handle layout—angled grips—and dropped the middle for bigger range. The camber can face up or down so you choose extended or restricted motion on every set.
Why Choose the Cambered Angled Grip
- Two Ranges in One Bar – Camber down for deep stretch presses; flip it up for short-path overloads.
- Eight Shoulder-Friendly Grips – Four widths (7", 16.5", 24", 30") plus forward or reverse angles double your options.
- Natural Wrist Alignment – Angled handles reduce joint stress and allow easy reverse-grip pressing.
- Plates Clear 3×3 Posts – Weight stops moved 2" outward keep iron away from rack and bench uprights.
- Slim, Stable Frame – 3" thinner than the original American Press Bar for steadier presses and smoother force transfer.
- USA-Made Durability – Fully welded, powder-coated steel built to outlast cheap imports.
Specifications
| Overall Length | 83.5" |
| Overall Width | 5 ¾" |
| Camber Depth | 2.5" (approx.) |
| Grip Widths | 7", 16.5", 24", 30" |
| Grip Count / Style | 8 angled (forward & reverse) |
| Grip Diameter | 1.5" |
| Individual Grip Length | 5" |
| Bar Weight | ≈ 35 lb |
| Rackable Area | 42" – 55" |
| Sleeve Length | 13.5" |
| Finish | Textured powder coat |
| Manufactured In | USA |
Who It Helps
Powerlifters, athletes, and anyone pressing for bigger numbers while keeping shoulders and wrists safe. Perfect for bench, incline, overhead, and triceps work.
American Thin Press™ Bar Comparison
| Model | Grip Widths (in) | Handle Style | Extra Feature |
|---|---|---|---|
| Neutral Grip | 7 | 16.5 | 24 | 30 (+ center) | Straight | Slim frame for steady presses, rows, and extensions |
| Angled Grip | 7 | 16.5 | 24 | 30 | Angled (forward / reverse) | Flip bar for reverse-grip pressing; 8 total hand positions |
| Cambered Neutral | 7 | 16.5 | 24 | 30 (+ center) | Straight | 2.5-in camber—flip for extended or shortened press path |
| Cambered Angled | 7 | 16.5 | 24 | 30 | Angled (forward / reverse) | 2.5-in flip-able camber + 8 angled grips for maximum options |
FAQ
Why isn’t there knurling on the handles?
These bars have a textured powder coat that gives a good grip. Adding knurling would significantly raise the price because we make the bars in small batches. If demand grows, we may add knurling later.
Do the sleeves spin?
No. Spinning sleeves would also raise costs and are unnecessary for the pressing and rowing moves this bar is made for. A solid sleeve keeps the bar strong and the price fair.
American Thin Press™ vs. American Press™ Bars (elitefts Comparison)
| American Thin Press™ Line | American Press™ Line | |
|---|---|---|
| Frame Thickness | 3" thinner front-to-back for better wrist alignment and control | Standard Swiss bar width |
| Sleeve Positioning | Sleeves moved 2" outward for increased plate clearance | Standard sleeve positioning |
| Rack Compatibility | Optimized for modern 3x3 racks with better upright clearance | May cause plate contact with uprights on some 3x3 racks |
| Bar Stability Under Load | Feels more stable (closer to straight bar feel) | Traditional Swiss bar feel; slight wobble possible at max loads |
| Grip Variations | 4 models: • Neutral • Angled • Cambered Neutral • Cambered Angled |
4 models: • Neutral • Angled • Cambered Neutral • Cambered Angled |
| Range of Motion (ROM) | Slightly increased ROM due to thinner frame | Standard ROM |
| Use Case | Best for controlled pressing, shoulder comfort, rehab, accessories | Best for heavy pressing, variety, and program versatility |
| Load Capacity | Same as American Press Line – built for heavy use | Same as Thin Line – built for heavy use |
| Construction | Fully welded, powder-coated steel – Made in USA | Fully welded, powder-coated steel – Made in USA |
Built for Focus, Trust, and Strength
We merged the thinner, steadier American Thin frame with our most versatile handle layout—angled grips—and dropped the middle for bigger range. The camber can face up or down so you choose extended or restricted motion on every set.
Why Choose the Cambered Angled Grip
- Two Ranges in One Bar – Camber down for deep stretch presses; flip it up for short-path overloads.
- Eight Shoulder-Friendly Grips – Four widths (7", 16.5", 24", 30") plus forward or reverse angles double your options.
- Natural Wrist Alignment – Angled handles reduce joint stress and allow easy reverse-grip pressing.
- Plates Clear 3×3 Posts – Weight stops moved 2" outward keep iron away from rack and bench uprights.
- Slim, Stable Frame – 3" thinner than the original American Press Bar for steadier presses and smoother force transfer.
- USA-Made Durability – Fully welded, powder-coated steel built to outlast cheap imports.
Specifications
| Overall Length | 83.5" |
| Overall Width | 5 ¾" |
| Camber Depth | 2.5" (approx.) |
| Grip Widths | 7", 16.5", 24", 30" |
| Grip Count / Style | 8 angled (forward & reverse) |
| Grip Diameter | 1.5" |
| Individual Grip Length | 5" |
| Bar Weight | ≈ 35 lb |
| Rackable Area | 42" – 55" |
| Sleeve Length | 13.5" |
| Finish | Textured powder coat |
| Manufactured In | USA |
Who It Helps
Powerlifters, athletes, and anyone pressing for bigger numbers while keeping shoulders and wrists safe. Perfect for bench, incline, overhead, and triceps work.
American Thin Press™ Bar Comparison
| Model | Grip Widths (in) | Handle Style | Extra Feature |
|---|---|---|---|
| Neutral Grip | 7 | 16.5 | 24 | 30 (+ center) | Straight | Slim frame for steady presses, rows, and extensions |
| Angled Grip | 7 | 16.5 | 24 | 30 | Angled (forward / reverse) | Flip bar for reverse-grip pressing; 8 total hand positions |
| Cambered Neutral | 7 | 16.5 | 24 | 30 (+ center) | Straight | 2.5-in camber—flip for extended or shortened press path |
| Cambered Angled | 7 | 16.5 | 24 | 30 | Angled (forward / reverse) | 2.5-in flip-able camber + 8 angled grips for maximum options |
FAQ
Why isn’t there knurling on the handles?
These bars have a textured powder coat that gives a good grip. Adding knurling would significantly raise the price because we make the bars in small batches. If demand grows, we may add knurling later.
Do the sleeves spin?
No. Spinning sleeves would also raise costs and are unnecessary for the pressing and rowing moves this bar is made for. A solid sleeve keeps the bar strong and the price fair.
American Thin Press™ vs. American Press™ Bars (elitefts Comparison)
| American Thin Press™ Line | American Press™ Line | |
|---|---|---|
| Frame Thickness | 3" thinner front-to-back for better wrist alignment and control | Standard Swiss bar width |
| Sleeve Positioning | Sleeves moved 2" outward for increased plate clearance | Standard sleeve positioning |
| Rack Compatibility | Optimized for modern 3x3 racks with better upright clearance | May cause plate contact with uprights on some 3x3 racks |
| Bar Stability Under Load | Feels more stable (closer to straight bar feel) | Traditional Swiss bar feel; slight wobble possible at max loads |
| Grip Variations | 4 models: • Neutral • Angled • Cambered Neutral • Cambered Angled |
4 models: • Neutral • Angled • Cambered Neutral • Cambered Angled |
| Range of Motion (ROM) | Slightly increased ROM due to thinner frame | Standard ROM |
| Use Case | Best for controlled pressing, shoulder comfort, rehab, accessories | Best for heavy pressing, variety, and program versatility |
| Load Capacity | Same as American Press Line – built for heavy use | Same as Thin Line – built for heavy use |
| Construction | Fully welded, powder-coated steel – Made in USA | Fully welded, powder-coated steel – Made in USA |
Description
Built for Focus, Trust, and Strength
We merged the thinner, steadier American Thin frame with our most versatile handle layout—angled grips—and dropped the middle for bigger range. The camber can face up or down so you choose extended or restricted motion on every set.
Why Choose the Cambered Angled Grip
- Two Ranges in One Bar – Camber down for deep stretch presses; flip it up for short-path overloads.
- Eight Shoulder-Friendly Grips – Four widths (7", 16.5", 24", 30") plus forward or reverse angles double your options.
- Natural Wrist Alignment – Angled handles reduce joint stress and allow easy reverse-grip pressing.
- Plates Clear 3×3 Posts – Weight stops moved 2" outward keep iron away from rack and bench uprights.
- Slim, Stable Frame – 3" thinner than the original American Press Bar for steadier presses and smoother force transfer.
- USA-Made Durability – Fully welded, powder-coated steel built to outlast cheap imports.
Specifications
| Overall Length | 83.5" |
| Overall Width | 5 ¾" |
| Camber Depth | 2.5" (approx.) |
| Grip Widths | 7", 16.5", 24", 30" |
| Grip Count / Style | 8 angled (forward & reverse) |
| Grip Diameter | 1.5" |
| Individual Grip Length | 5" |
| Bar Weight | ≈ 35 lb |
| Rackable Area | 42" – 55" |
| Sleeve Length | 13.5" |
| Finish | Textured powder coat |
| Manufactured In | USA |
Who It Helps
Powerlifters, athletes, and anyone pressing for bigger numbers while keeping shoulders and wrists safe. Perfect for bench, incline, overhead, and triceps work.
American Thin Press™ Bar Comparison
| Model | Grip Widths (in) | Handle Style | Extra Feature |
|---|---|---|---|
| Neutral Grip | 7 | 16.5 | 24 | 30 (+ center) | Straight | Slim frame for steady presses, rows, and extensions |
| Angled Grip | 7 | 16.5 | 24 | 30 | Angled (forward / reverse) | Flip bar for reverse-grip pressing; 8 total hand positions |
| Cambered Neutral | 7 | 16.5 | 24 | 30 (+ center) | Straight | 2.5-in camber—flip for extended or shortened press path |
| Cambered Angled | 7 | 16.5 | 24 | 30 | Angled (forward / reverse) | 2.5-in flip-able camber + 8 angled grips for maximum options |
FAQ
Why isn’t there knurling on the handles?
These bars have a textured powder coat that gives a good grip. Adding knurling would significantly raise the price because we make the bars in small batches. If demand grows, we may add knurling later.
Do the sleeves spin?
No. Spinning sleeves would also raise costs and are unnecessary for the pressing and rowing moves this bar is made for. A solid sleeve keeps the bar strong and the price fair.
American Thin Press™ vs. American Press™ Bars (elitefts Comparison)
| American Thin Press™ Line | American Press™ Line | |
|---|---|---|
| Frame Thickness | 3" thinner front-to-back for better wrist alignment and control | Standard Swiss bar width |
| Sleeve Positioning | Sleeves moved 2" outward for increased plate clearance | Standard sleeve positioning |
| Rack Compatibility | Optimized for modern 3x3 racks with better upright clearance | May cause plate contact with uprights on some 3x3 racks |
| Bar Stability Under Load | Feels more stable (closer to straight bar feel) | Traditional Swiss bar feel; slight wobble possible at max loads |
| Grip Variations | 4 models: • Neutral • Angled • Cambered Neutral • Cambered Angled |
4 models: • Neutral • Angled • Cambered Neutral • Cambered Angled |
| Range of Motion (ROM) | Slightly increased ROM due to thinner frame | Standard ROM |
| Use Case | Best for controlled pressing, shoulder comfort, rehab, accessories | Best for heavy pressing, variety, and program versatility |
| Load Capacity | Same as American Press Line – built for heavy use | Same as Thin Line – built for heavy use |
| Construction | Fully welded, powder-coated steel – Made in USA | Fully welded, powder-coated steel – Made in USA |
